Click image to view full size image
Main parameters of full automatic chain link machine1. Width scope of weaving: 1-4m Wire scope of weaving: 2-4mm Mesh scope of weaving: 30-100mm With 3 sets of mesh model at buyer's requirements 2. The machine is controlled by PLC automatic controller, so only one person is needed to operate it 3. The output per minute: for example: If the mesh is 50x50mm, width: 2m, the output will be: 1M2 min. 4. Suitable wire to the machine: the tensile scope of the wire 300-500N/M2 5. Use compacting machine to make it into rolls 6. Total power: 11kw 7. Weight of equipment: 4200kg 8. Outside size: main machine: 6700x1430x1800mm
| No. | Items Model | Unit | Parameter |
| 1 | Y100L2-4main motor | KW | 3 |
| 2 | Y100L-6mesh collection motor | KW | 1.5 |
| 3 | AB-25water pump motor | W | 90 |
| 4 | Final drive shaft rotating speed | Round/min | 476 |
| 5 | Form shaft rotating speed | Round/min | 278 |
| 6 | Mesh forming speed | Round/min | 11 |
| 7 | Theoretical output | times/n | 240 |
| 8 | Main frame | mm | 4700*800*1170 |
CHAIN LINK FENCE MACHINE
